reServer Fan Bracket - STL FILE

This is the custom fan bracket / extension for seeedStudio's reServer. This is a digital download of the STL file only. The zip file contains a STL file which you can 3D print yourself.

**** NOTE ****

You'll need 4x M3 heat set inserts and 4x M3 6mm length screws.

The bracket only fits a 14mm thick fan such as the Noctua NF-A9x14 (92mm x 14mm) fan.

You’ll also need to 3D print this with supports. I use Prusa Slicer. Recommended material is PETG. Make sure you set the “Support Material” > “Overhang threshold” setting to 20 degrees to prevent unnecessary printing of supports.

Post in Seeestudio's forums if you have questions!